Find hidden mold fast with licensed inspectors and lab-backed results
When you need mold inspection and testing keller TX, our team locates hidden growth after water damage, roof leaks, or slab leaks. We serve homeowners and property managers across Keller, TX with same-day scheduling, moisture mapping, and lab-verified results. If you have musty odors or recent water intrusion, call us at 453423789.
Mold inspection and testing keller TX is a diagnostic service that locates hidden mold growth, identifies the species present, and traces the moisture source feeding it. We use moisture meters, thermal imaging cameras, and boroscopes to check wall cavities, attics, and crawl spaces. Air and surface samples go to an accredited lab, and you get a written report with lab results, moisture readings, and a clear scope of work.
Keller homes deal with high humidity, clay soil movement, and frequent roof leaks after spring storms. Those conditions push moisture into drywall, insulation, and subflooring where mold can start within 24 to 48 hours. If you search for mold testing near me keller TX after a burst pipe or appliance leak, we respond same day, map the moisture, and test before growth spreads.
Mold hides behind baseboards, under hardwood, and inside wall cavities. Our testing finds it fast, documents it properly for insurance, and gives you a clear plan to fix the source before it spreads.
We collect air and surface samples and send them to an accredited lab. Results come back in 24 to 48 hours with species identification and spore counts. That documentation supports insurance claims and confirms whether remediation is needed.
Call before noon and we can often be on-site the same day. Our technicians arrive with moisture meters, thermal imaging cameras, and boroscopes ready to inspect attics, crawl spaces, and wall cavities without tearing your home apart.
Our reports include moisture readings, thermal images, lab results, and a written scope. Adjusters accept them because they follow IICRC and industry standards. We also document pre-existing conditions so your claim stays clean.
Testing alone does not stop mold. We trace the moisture back to the burst pipe, roof leak, or slab leak feeding it. You get a clear repair recommendation so the problem does not return after cleanup.
We follow a five-step process that moves from visual inspection to lab results and a written scope. Each step is documented so you know exactly what we found and what it takes to fix it.
We walk the property and check attics, crawl spaces, baseboards, and ceilings for visible growth, water stains, and musty odors. This takes 30 to 45 minutes for a typical Keller home and sets the scope for testing.
Using moisture meters, thermal imaging cameras, and hygrometers, we map elevated moisture behind walls, under floors, and around plumbing fixtures. We mark wet zones and compare them to dry reference areas.
We collect air samples with calibrated pumps and surface samples from suspect areas. Samples are labeled, sealed, and shipped to an accredited lab. Collection takes 20 to 30 minutes depending on the number of samples.
The lab analyzes samples for mold species and spore counts. Results return in 24 to 48 hours. We review them and flag any species that indicate active growth or a moisture problem that needs immediate attention.
You receive a report with lab results, moisture readings, thermal images, and a written scope of work. We walk you through the findings and explain what remediation, drying, or repairs are needed next.
Pro Water Damage Restoration has served Keller and Tarrant County since 2005. Our technicians hold IICRC WRT, ASD, and AMRT certifications and carry a Texas Mold Remediation License. We have completed thousands of water damage and mold projects across Keller, Southlake, and Roanoke. That experience means we know where mold hides in local building stock and how to document it for insurance.
We combine lab-backed testing with real remediation experience. That means the same team that finds the mold can also fix the moisture source and clean it up, so you are not handed off between contractors.
Our team holds IICRC WRT, ASD, and AMRT certifications plus a Texas Mold Remediation License. We follow IICRC S520 standards for mold work and document every step. That protects you and your insurance claim.
We schedule mold testing services keller within hours, not days. Call before noon and we can often be on-site the same afternoon. Emergency mold testing keller TX is available after burst pipes, sewage backups, and storm flooding.
We test, document, and remediate. You do not need to hire a separate lab, inspector, and remediation crew. That saves time, reduces finger-pointing, and keeps your project moving from inspection to clearance.
We know Keller's clay soil, humid summers, and storm patterns. We know which neighborhoods see crawl space flooding and which streets get roof leak calls after hail. That local experience speeds up the inspection and improves accuracy.
Every mold inspection includes a visual walkthrough, moisture mapping, sample collection, lab analysis, and a written report. We also trace the moisture source and recommend next steps. Remediation and repairs are separate services if needed.
We check attics, crawl spaces, baseboards, ceilings, and plumbing fixtures for visible mold, water stains, and musty odors. This step takes 30 to 45 minutes and sets the testing scope.
Using moisture meters, thermal imaging cameras, and hygrometers, we map elevated moisture behind walls and under floors. We mark wet zones and compare them to dry areas.
We collect air samples with calibrated pumps and surface samples from suspect areas. Samples are sealed and shipped to an accredited lab for species identification and spore counts.
The lab analyzes samples and returns results in 24 to 48 hours. We review them and flag any species that indicate active growth or a moisture problem needing immediate attention.
You receive a report with lab results, moisture readings, thermal images, and a written scope. We walk you through the findings and explain what remediation or repairs are needed.
Mold is a symptom of trapped moisture. We find both the mold and the moisture source, then document everything so you can fix the problem and prevent it from returning.
Hidden mold in wall cavities or crawl spaces can spread and cause health issues. Without testing, you cannot confirm the species or severity.
We use thermal imaging cameras and boroscopes to find hidden moisture, then collect air and surface samples. Lab results confirm whether mold is present and what species it is.
Water from burst pipes and slab leaks soaks drywall and subflooring. Mold can start within 24 to 48 hours and spread behind walls.
We extract water, dry the area with dehumidifiers, and test for mold. If growth is found, we document it for insurance and recommend remediation.
Roof leaks soak insulation and attic sheathing. Mold grows quickly in warm, humid attics and can spread to ceilings below.
We inspect the attic with infrared cameras, test insulation and sheathing, and trace the leak. We provide a report and repair recommendations.
Crawl space flooding creates constant humidity that feeds mold on joists and subflooring. It can spread into living areas.
We remove standing water, dry with dehumidifiers, and test for mold. We also recommend encapsulation or drainage fixes to prevent future flooding.
We inspect with moisture meters and thermal cameras, collect air and surface samples, and send them to an accredited lab. Results come back in 24 to 48 hours.
You get a clear report showing whether mold is present and what remediation is needed. Insurance claims are easier to file with lab documentation.
We use boroscopes and infrared cameras to check wall cavities, attics, and crawl spaces. We collect air samples from multiple rooms and compare spore counts.
The lab identifies the mold species and source. You get a targeted plan to fix the moisture and remove the mold.
We provide a full inspection with moisture mapping, air and surface sampling, and a written report. The report is insurance-ready and follows IICRC standards.
Buyers and sellers get clear documentation of the home's mold status. Negotiations move faster with lab-backed results.
We extract water, disinfect with Benefect or Decon 30, dry with dehumidifiers, and test for mold. We document everything for insurance.
The basement is dried and tested. You get a report showing whether mold growth occurred and what steps are needed next.
Measures moisture content in drywall, wood, and subflooring. We use it to find wet zones behind walls and under floors.
Detects temperature differences that reveal hidden moisture. We use infrared cameras to scan walls, ceilings, and floors without tearing them open.
A camera on a flexible rod that lets us see inside wall cavities and crawl spaces. We use it to confirm mold growth in hard-to-reach areas.
Measures relative humidity in the air. We use it to check attic and crawl space conditions that promote mold growth.
Draws air through a collection cartridge to capture mold spores. We use calibrated pumps for accurate lab analysis.
Captures mold spores and fine particles during remediation. We use HEPA vacuums to prevent cross-contamination.
The IICRC S520 standard guides mold remediation and inspection. We follow it for moisture mapping, containment, and clearance testing. It ensures our work meets industry best practices.
We map moisture readings across the property to identify wet zones and compare them to dry reference areas. This method pinpoints the source and extent of moisture intrusion.
We collect air samples with calibrated pumps and surface samples from suspect areas. Samples go to an accredited lab for species identification and spore counts.
During remediation, we set containment barriers with plastic sheeting and duct tape to prevent mold spores from spreading. This protects unaffected areas of your home.
Keller's climate and building stock shape how we approach mold inspection and testing. Summers are hot and humid, and spring storms often drive water into roofs and walls. Many homes sit on clay soil that shifts and cracks slabs, leading to slab leaks and hidden moisture. We see crawl space flooding in older neighborhoods and roof leak damage after hail. Our technicians know ZIP codes 76248 and 76262 well, including Hidden Lakes, Marshall Ridge, and Keller Town Center. When you call for professional mold inspection keller TX, we arrive with moisture meters, thermal imaging cameras, and boroscopes ready to check attics, crawl spaces, and wall cavities. We follow IICRC S520 standards and provide lab-backed reports for insurance. If you need mold testing after water damage keller, we schedule same-day inspections and deliver results within 48 hours.
Homes here often have slab leaks and roof leaks after storms. We frequently inspect attics and wall cavities for hidden mold.
Newer construction with tight building envelopes. Moisture from appliance leaks can get trapped, so we test air quality carefully.
A mix of older and newer homes. We see crawl space flooding and musty odors in older properties.
Established neighborhood with mature trees. Roof leaks and attic mold are common after heavy rain.
Humidity above 60% slows drying and promotes mold growth. We use dehumidifiers and test air quality to confirm moisture levels are safe.
Clay soil shifts with wet and dry cycles, cracking slabs and pipes. Slab leaks feed mold under floors. We use thermal cameras to find hidden moisture.
Heavy rain overwhelms gutters and roofs, driving water into attics and walls. We inspect after storms and test for mold before it spreads.
A slab leak soaked the hallway drywall and baseboards. The homeowner noticed a musty odor but saw no visible mold. Moisture readings were elevated at 22% in the drywall.
We mapped the moisture with thermal cameras, collected air and surface samples, and confirmed mold growth. After remediation and drying, moisture dropped to 8% and lab results showed no active spores.
Keep an eye on your water bill for spikes and schedule annual moisture checks. Fix slab leaks quickly to prevent future mold.
A roof leak during a spring storm soaked attic insulation and sheathing. The homeowner smelled a musty odor in the upstairs bedroom. Infrared camera showed wet insulation across a 10-foot section.
We tested the insulation and sheathing, confirmed mold growth, and documented it for insurance. After remediation and roof repair, air samples showed normal spore levels and the attic dried to 12% moisture.
Inspect your roof after every major storm and replace damaged shingles. Keep gutters clear to prevent water backup.
Heavy rain flooded the crawl space, leaving standing water and high humidity. The homeowner noticed a musty smell in the living room. Hygrometer readings showed 75% relative humidity.
We removed standing water, dried with dehumidifiers, and tested for mold. Lab results confirmed mold on joists. After remediation and encapsulation, humidity dropped to 45% and spore counts returned to normal.
Install a crawl space dehumidifier and check for drainage issues each spring. Keep vents clear to maintain airflow.
Most mold inspection and testing in Keller TX runs $250 to $650 depending on the number of samples and the size of the property. A basic inspection with two air samples starts around $250. Larger homes, crawl spaces, or commercial buildings with multiple sample locations can reach $650 or more. Lab fees are included in that range.
On-site testing takes 45 to 90 minutes for a typical Keller home. Lab results come back in 24 to 48 hours. If you need same day mold inspection keller TX, call before noon and we can often be on-site that afternoon. The full report is delivered within one business day of lab results.
Yes, if water sat for more than 24 to 48 hours or if you smell a musty odor. Mold can start growing inside drywall and insulation before you see it. Testing after water damage keller confirms whether growth is present and gives you documentation for your insurance claim.
A full inspection includes a visual walkthrough, moisture mapping with thermal imaging cameras and moisture meters, air and surface sample collection, lab analysis, and a written report. We also trace the moisture source and recommend repairs or remediation. The report is insurance-ready and follows IICRC standards.
Pro Water Damage Restoration did a mold inspection after our washing machine leaked. They were on time, explained everything, and had lab results back in two days. The report was detailed and our insurance accepted it without questions.
We called after a roof leak and they came out the same day. The technician used a thermal camera and found moisture we did not know about. Mold testing confirmed no growth, but they gave us a plan to prevent it. Honest and professional.
After a slab leak, we needed mold testing fast. Pro Water Damage Restoration scheduled us within hours and delivered a clear report. They also fixed the leak and dried everything out. Highly recommend for Keller homeowners.
Standing water feeds mold fast. We extract water with truck-mounted units and air movers, then test for moisture before mold has a chance to colonize. Same-day response across Keller.
Emergency Water ExtractionAfter extraction, we place Dri-Eaz and Phoenix desiccant dehumidifiers to dry wall cavities and subflooring. Drying to IICRC standards prevents the moisture that mold needs to grow.
Structural Drying & DehumidificationIf testing confirms mold, our Texas-licensed team sets containment barriers, uses HEPA vacuums and antimicrobial solution, and removes contaminated materials. We follow IICRC S520 and provide clearance testing.
Mold RemediationSewage backups introduce bacteria and moisture that trigger mold within 24 hours. We extract, disinfect with Benefect or Decon 30, and test the area before reconstruction.
Sewage Backup CleanupFull-service restoration from extraction to reconstruction. We dry, test for moisture, and rebuild. Mold inspection is built into our process so nothing is missed.
Water Damage RestorationAfter mold remediation, we rebuild drywall, baseboards, and flooring. Reconstruction includes moisture checks and sealant application to prevent future intrusion.
Water Damage ReconstructionFloodwater carries contaminants and saturates materials. We extract, dry, and test for mold before rebuilding. Keller storm flooding often requires full inspections.
Flood Damage RestorationBasement flooding creates humid conditions mold loves. We remove standing water, dry with dehumidifiers, and test air quality before finishing.
Basement Flood CleanupCleanup includes water removal, antimicrobial treatment, and moisture testing. We document everything for insurance and flag any mold risk.
Water Damage CleanupFast water extraction with truck-mounted units and water extraction units. We remove standing water and check moisture levels before mold can start.
Water ExtractionStanding water is a mold incubator. We remove it, dry the area, and test for hidden moisture in subflooring and wall cavities.
Standing Water RemovalCeiling water damage from roof leaks often hides mold above the drywall. We inspect with thermal cameras, test, and repair before mold spreads.
Ceiling Water Damage RepairWet drywall and insulation grow mold fast. We cut out affected sections, dry the cavity, test for spores, and replace materials.
Wall & Drywall Water Damage RepairCarpet traps moisture and mold spores. We extract water, lift carpet for drying, and test the pad and subfloor before reinstalling.
Carpet Water ExtractionHardwood floors cup and trap moisture underneath. We dry, test for mold in the subflooring, and restore or replace boards as needed.
Hardwood Floor Water Damage RestorationMusty odors mean mold or trapped moisture. We locate the source, test for mold, and remove odors with HEPA filtration and antimicrobial treatment.
Water Damage Odor RemovalKeller storms drive water into roofs and walls. We tarp, extract, dry, and test for mold before reconstruction begins.
Storm Water Damage RestorationBurst pipes soak drywall and subflooring in minutes. We shut off water, extract, dry, and test for mold within 24 to 48 hours.
Burst Pipe Water Damage RepairAppliance leaks from washers and water heaters soak baseboards and drywall. We extract, dry, and test for hidden mold.
Appliance Leak CleanupRoof leaks stain ceilings and feed mold in attic insulation. We inspect with infrared cameras, test, and repair the leak.
Roof Leak Water Damage RepairWe use moisture meters, thermal imaging cameras, and hygrometers to map hidden moisture. This step comes before mold testing.
Moisture Mapping & Leak DetectionFurniture and belongings absorb moisture and mold spores. We clean, dry, and test contents before returning them to your home.
Water Damage Content RestorationCommercial properties need fast mold testing to reopen safely. We test air quality, document findings, and remediate to IICRC standards.
Commercial Water Damage RestorationOur mold reports include lab results, moisture readings, and photos. Adjusters accept them, which speeds up your claim.
Insurance Claim AssistanceMold starts in 24 to 48 hours. Our 24/7 response extracts water fast and schedules mold testing before growth spreads.
24/7 Emergency Water Damage ResponseCrawl space flooding creates humid conditions mold loves. We remove water, dry with dehumidifiers, and test for mold.
Crawl Space Water RemovalWe place Dri-Eaz and Phoenix dehumidifiers to pull moisture from walls and subflooring. Drying prevents mold growth.
Dehumidification ServicesStructural repairs follow mold testing and remediation. We replace damaged framing, drywall, and subflooring.
Structural Water Damage RepairDrying to IICRC standards stops mold before it starts. We monitor moisture daily and test before closing walls.
Water Damage DryingReal experiences from customers who chose our Mold Inspection & Testing services
We had a slab leak last spring and noticed a musty smell in the hallway. Pro Water Damage Restoration came out the same day, used thermal cameras to find moisture behind the baseboards, and tested for mold. Lab results came back in two days. They explained everything and gave us a clear plan. Highly recommend.
Homeowner, Hidden Lakes
I manage several rental properties in Keller and use Pro Water Damage Restoration for mold testing after every water damage call. They are fast, professional, and their reports are detailed enough for insurance. The lab results are always back within 48 hours. They have saved me from several bad tenant situations.
Property Manager, Keller Town Center
After a roof leak during a storm, I was worried about mold in the attic. The team inspected with infrared cameras and found elevated moisture in the insulation. They tested and confirmed no active mold growth, then dried everything out. I appreciated the honesty and the thorough report.
Homeowner, Marshall Ridge
We had a slab leak last spring and noticed a musty smell in the hallway. Pro Water Damage Restoration came out the same day, used thermal cameras to find moisture behind the baseboards, and tested for mold. Lab results came back in two days. They explained everything and gave us a clear plan. Highly recommend.
Homeowner, Hidden Lakes
I manage several rental properties in Keller and use Pro Water Damage Restoration for mold testing after every water damage call. They are fast, professional, and their reports are detailed enough for insurance. The lab results are always back within 48 hours. They have saved me from several bad tenant situations.
Property Manager, Keller Town Center
Mold spreads fast after water damage. Our licensed team provides same-day mold inspection and testing keller TX with lab-backed results and insurance-ready reports. Call 453423789 now and we will schedule your inspection today.